Microprocessor Conductivity TDS Meter

Technical Specifications:

FunctionCond. & Temp., TDS & Temp., SAL & Temp.
Display16 character x 2 lines alphanumeric  BL LCD
Power supply230 V ± 10% 50 Hz AC
RangeConductivity     0.00 uS/cm to 1000 mS Auto ranging
 TDS                 0.0   ppm    to 1000  ppt Auto ranging
 SAL                  0.0   ppt      to  50   ppt Auto ranging
ResolutionConductivity     0.01 uS on the lowest range
 TDS                 0.1   ppm
 SAL                 0.1   ppt
Accuracy± 0.5%of range ± 1 digit
TDS Factor0.50(By default) & adjustable manually
SAL Factor0.75(By default) & adjustable manually
Cell const.adjustmentDigital 0.05 to 2.000  By default 1.000
Temp.compensation0 to 70 ˚C Auto with temp. probe/Manual with  keys
Temp. Coefficient adj.0.00% to 4.00% adjustable. By default 2.00%
Reference Temp.20 Degree C & 25 Degree C
Measuring Frequency100 Hz & 1 KHz Auto Selection
Mode of CalibrationBy Value & By Measurement
Range-200 ˚C to +200˚C
Resolution0.1 ˚C
Accuracy± 0.1% of range ±1 digit
Calibrationtwo point manual
SensorsPt100 probe
Data entryBy six soft touch keys with audible sound
Storage1000 samples
Real time display24 Hour mode with Date
InterfaceRS-232,Centronics & computer
Print formatAll Data, Date Wise
Digital outputSerial RS-232, Parallel Centronics
AccessoriesConductivity Cell            Instruction Manual
Temp Probe


Appearance and specification subject to change due to continuous development.